CeramicSpeed UFO Clean Bearings 100ml - Cycling Boutique
Sold Out
  • SKU: CB22829

CeramicSpeed UFO Clean Bearings 100ml

Rs. 2,199.00
Tax included. Shipping calculated at checkout.
Shop securely for thousands of cycling products online in India Shop online securely for thousands of cycling products in India
Ordering Assistance Helpline:
Please speak with our support team on +919538949110 for any guidance while ordering. Product Country of Origin: Taiwan.

UFO Clean Bearings
The CeramicSpeed UFO Clean Bearings thoroughly remove grease and grime from within cartridge bearings. The unique properties efficiently break down grease and allow for simple cleansing of bottom brackets, wheel, headset, and pulley wheel bearings.

This is a non-toxic and biodegradable formula - environmentally friendly and safe.

Technical Details
  • Non-toxic and biodegradable formula
  • Thoroughly removes grease and grime from bearings
  • Easy to apply with an included pipette
  • Developed and bottled in Denmark
  • Contains 100ml per bottle
  • Not optimal for general drive train cleaning
  • Safe for carbon, glossy or matte painted, and anodized surfaces


Standard maintenance can and should be done without removing the bearings from their cup, frame bore, or hub shell. This will limit potential stress or impact damage from knocking out the bearings and reinstalling them.

For cranks, remove the cranks, any spacers, and dust covers.

For hubs, follow the hub/wheel manufacturer's instructions for removing axle end caps and dust covers to access the face of the bearings.

With the face of the bearing visible, use a knife edge or flat pick to lift off the bearing seal, starting on the inner lip (at the inner race) and carefully lifting. Small, smooth movements will help prevent damaging the seal during removal. Once the seal is removed, clean both sides, ensure it is flat, and set aside. You should now have access to the individual balls inside of the bearing. Using a cloth or shop rag, wipe away grease on the face of the bearing, revealing the balls. Look at the back of the bearing if you see a solid ring. There is no direction to the performance of the bearing, but cleaning and maintenance are more accessible and more efficient when performed from the face/front of the bearing. You may turn the bearing around at this time to allow adequate cleaning and ease of future maintenance.

Normal cleaning
To flush and clean CeramicSpeed bearings, UFO Clean Bearings was developed as a non-toxic, easy-to-use bearing cleaner. Use the pipette to add a few drops of cleaner into each bearing (Approx. 0,5 – 2.0mL, dependent on the bearing size). Rotate the bearing to cause an 'agitation' effect inside the bearing.

After soaking for 3-5 minutes, use compressed air to flush out the grease and contamination. Repeat this process a second time if needed to clean the bearing thoroughly. Once the bearing is visually cleaned out and rotates smoothly, allow the bearing to air dry before applying fresh grease. Follow the grease selection and application guide at the bottom of this document for the best performance and longevity. Once the grease is used, reinstall the face seal by laying it on the bearing (the all-rubber side should face out) and evenly pressing it into the groove on the outer race. The seal should sit flat and even on the bearing. Be sure to take careful note of the direction on any dust covers when reassembling the parts.

SKU# 110701

Buy the finest Cycling products from Cycling Boutique, India's 1st and most trusted Online Bike Store - Established in 2012.

Customer Reviews

Be the first to write a review

Related Products

Your browsing history