Muc-Off Ultimate Tubeless Setup Kit | Road (21mm Tape / 44mm Valves) (20137)

Muc-Off Ultimate Tubeless Setup Kit – Road (21mm Tape / 44mm Valves) (20137)

The Muc-Off Ultimate Tubeless Setup Kit is a complete, all-in-one solution for converting your tubeless-ready road, gravel, or CX wheels. Designed for convenience and performance, this kit includes everything required to achieve a reliable and efficient tubeless setup.

Featuring high-quality tubeless rim tape, CNC-machined valves, and Muc-Off’s No Puncture Hassle Sealant, it ensures optimal sealing, puncture protection, and long-lasting performance. Ideal for riders looking to upgrade to a tubeless system with confidence.

Important Information on Sizing: Always verify your bike’s actual rim width and match it with the most rim tape size while ordering this kit. The text description used by Muc-Off viz. Road/Gravel/Trail/XC etc. are indicative reference terms for approximate tire/application sizes. For any technical assistance, please feel free to reach Cycling Boutique’s skilled technical support team.

Key Features

• Complete Tubeless Kit – Everything needed for quick and easy setup
• Road-Specific Configuration – 21mm rim tape and 44mm valves
• High-Quality Components – Durable tape and precision CNC valves
• Puncture Protection – Includes No Puncture Hassle tubeless sealant
• Reliable Sealing – Ensures airtight fit for tubeless-ready rims
• Versatile Compatibility – Suitable for road, gravel, and cyclocross bikes

Specifications

• Brand: Muc-Off
• Model: Ultimate Tubeless Setup Kit – Road
• Part Number: 20137
• Rim Tape Width: 21 mm
• Rim Tape Length: 10 m
• Valve Length: 44 mm

How to Use

1. Remove all old rim strip or tape and clean rim.
2. Make sure the rim is clean and dry before applying tape.
3. Get the tape from the packet and line it up from the opposite side of the valve.
4. Start by unwinding a small amount of the tape and pressing it down using your thumb or finger to hold pressure down.
5. Continue to hold while you pull back on the tape and stick down tight once you have a few cm on the tape will stick and holding is no longer needed.
6. Continue the entire way around the rim (if it has a big concave in you can pull and wiggle the tape to fill any edges)
7. Overlap the tape by roughly 10 – 15cm
8. Leave a small amount unstuck so that you can cut the remainder off
9. Once cut sketch and pull the tape down to create a seal
10. Go around the rim with your thumb to make sure there is no air pockets or messed areas.
11. Once your happy with how it looks using a small pin locate the valve hole and cleanly pierce the tape ready for the valve
12. Grab your tubeless valve and remove the lock ring and o ring
13. Chose the right rubber fitment for your rim tape and insert valve into rim
14. Refit O-ring and Lock ring making sure you lock the valve in (don’t go to tight or could damage the rubber)
15. Re-fit your tyre of choice carful not to damage the tape (by using tyre levers ect)
16. Inflate tyre to create a fit (should hear some popping around the rim)
17. Release Air and remove valve core using the spare valve cap
18. Grab the sealant pouch and give it a shake
19. Unscrew the cap and fit on the valve in a up right position
20. While holding the pouch spin the wheel downward so that the pouch is now upside down
21. Insert the sealant by rolling the pouch down
22. Spin wheel back up right and remove pouch
23. Reinsert valve core and inflate to your pressure

Everything needed to get set up and ready to roll
Our Ultimate Tubeless Setup Kit is a one-stop shop for everything you need to make the switch with your tubeless-ready wheelset.

Wide range of sizes available
Kits available for road, gravel and CX to enduro, trail and downhill.

In The Box

• 1 × 10m Tubeless Rim Tape (Suitable for Two Wheels)
• 2 × Tubeless Valves (Black)
• 2 × Valve Caps
• 2 × Locking Nuts
• 1 × Valve Core Removal Tool
• 3 × Pairs of Rubber Bases (Different Sizes)
• 2 × Seal Patches
• 2 × Pouches of Tubeless Sealant

SKU# 20137